These one-piece scope mounts from Badger Ordnance provide a rock-solid mount for scopes with 34mm tubes. Their monolithic construction withstands harsh recoil, and makes for easy mounting onto any Picatinny receiver rail. Available in two heights, both measured from bottom of mount to center of optic. 1.3" height has built-in 20 MOA elevation. 1.49" height has no MOA. Rings secure with 4 Torx® head screws each. Reducer rings, available separately, allow use on 30mm scope tubes. Includes installation wrench.
.
Altro...
Questi supporti monopezzo per cannocchiali di Badger Ordnance offrono un montaggio estremamente solido per cannocchiali con tubi da 34mm. La loro costruzione monolitica resiste al forte rinculo e rende il montaggio su qualsiasi binario ricevitore Picatinny semplice. Disponibili in due altezze, entrambe misurate dalla base del supporto al centro dell'ottica. L'altezza di 1.3" include un'elevazione incorporata di 20 MOA. L'altezza di 1.49" non ha MOA. Gli anelli sono fissati con 4 viti a testa Torx® ciascuno. Gli anelli riduttori, disponibili separatamente, permettono l'utilizzo su tubi di cannocchiali da 30mm. Include chiave per l'installazione.
.
Altro...
Punteggi dei clienti per BADGER ORDNANCE 34MM UNIMOUNT ULTRA HIGH (1.49"X4.625") ALUMINUM
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 5
Perfect for precision(16/09/2017)
This is the second Badger Ordance product I have bought in my lifetime and man are these scope mounts awesome! They are beefy and rigid, and come perfectly machined straight from the factory so you do not need to lap the rings at all, and believe me I checked using lapping alignment bars. A note though, these mounts and rings sometimes don't have the most beautiful finish in the world, but to their credit these weren't designed to go well with a full gloss wood stocked hunting rifle. These mounts were made to handle use and abuse. Badger Ordnance scope rings and mounts are my go-to for any firearm now and no, I'm not sponsored by them.
Gold Standard for 1 Piece Mounts(04/02/2015)
Badger Ord. has long been a standard in weapon and optic accessories. I have used their M40 rings as well this mount for over 5 years. The fit, finish and accuracy are spot on. There are other quality products on the market, but not at this price point with this pedigree. Hold's Zero on Scar17's, .300WM and .338LM bolt guns without missing a beat. If you don't NEED QD, this is the mount to buy.
N. prodotto: 093000048 BADGER ORDNANCE 34MM UNIMOUNT ULTRA HIGH (1.49"X4.625") ALUMINUM Parti Fabbricante: 30664 Questi supporti monopezzo per cannocchiali di Badger Ordnance offrono un montaggio estremamente solido per cannocchiali con tubi da 34mm. La loro costruzione monolitica resiste al forte rinculo e rende il montaggio su qualsiasi binario ricevitore Picatinny semplice. Disponibili in due altezze, entrambe misurate dalla base del supporto al centro dell'ottica. L'altezza di 1.3" include un'elevazione incorporata di 20 MOA. L'altezza di 1.49" non ha MOA. Gli anelli sono fissati con 4 viti a testa Torx® ciascuno. Gli anelli riduttori, disponibili separatamente, permettono l'utilizzo su tubi di cannocchiali da 30mm. Include chiave per l'installazione.
Altezza:
1.49''
Diametro del tubo dell'ottica:
34mm
Elevation:
0 MOA
Finitura:
Opaco Black
Lunghezza:
4.625''
Tipo:
Picatinny
Peso della spedizione: 0,159kgAltezza di spedizione: 58mmLarghezza di spedizione: 84mmLunghezza di spedizione: 145mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 093000090 BADGER ORDNANCE 30MM UNIMOUNT EXTRA HIGH (1.3"X4.65") 20 MOA ALUMINUM Parti Fabbricante: 30696 Questi supporti monopezzo per cannocchiali di Badger Ordnance offrono un montaggio estremamente solido per cannocchiali con tubi da 34mm. La loro costruzione monolitica resiste al forte rinculo e rende il montaggio su qualsiasi binario ricevitore Picatinny semplice. Disponibili in due altezze, entrambe misurate dalla base del supporto al centro dell'ottica. L'altezza di 1.3" include un'elevazione incorporata di 20 MOA. L'altezza di 1.49" non ha MOA. Gli anelli sono fissati con 4 viti a testa Torx® ciascuno. Gli anelli riduttori, disponibili separatamente, permettono l'utilizzo su tubi di cannocchiali da 30mm. Include chiave per l'installazione.
344.9EUR0344,90 €
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
These one-piece scope mounts from Badger Ordnance provide a rock-solid mount for scopes with 34mm tubes. Their monolithic construction withstands harsh recoil, and makes for easy mounting onto any Picatinny receiver rail. Available in two heights, both measured from bottom of mount to center of optic. 1.3" height has built-in 20 MOA elevation. 1.49" height has no MOA. Rings secure with 4 Torx® head screws each. Reducer rings, available separately, allow use on 30mm scope tubes. Includes installation wrench.
.
Altro...
Questi supporti monopezzo per cannocchiali di Badger Ordnance offrono un montaggio estremamente solido per cannocchiali con tubi da 34mm. La loro costruzione monolitica resiste al forte rinculo e rende il montaggio su qualsiasi binario ricevitore Picatinny semplice. Disponibili in due altezze, entrambe misurate dalla base del supporto al centro dell'ottica. L'altezza di 1.3" include un'elevazione incorporata di 20 MOA. L'altezza di 1.49" non ha MOA. Gli anelli sono fissati con 4 viti a testa Torx® ciascuno. Gli anelli riduttori, disponibili separatamente, permettono l'utilizzo su tubi di cannocchiali da 30mm. Include chiave per l'installazione.
.
Altro...
Punteggi dei clienti per BADGER ORDNANCE 34MM UNIMOUNT ULTRA HIGH (1.49"X4.625") ALUMINUM
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 5
Perfect for precision(16/09/2017)
This is the second Badger Ordance product I have bought in my lifetime and man are these scope mounts awesome! They are beefy and rigid, and come perfectly machined straight from the factory so you do not need to lap the rings at all, and believe me I checked using lapping alignment bars. A note though, these mounts and rings sometimes don't have the most beautiful finish in the world, but to their credit these weren't designed to go well with a full gloss wood stocked hunting rifle. These mounts were made to handle use and abuse. Badger Ordnance scope rings and mounts are my go-to for any firearm now and no, I'm not sponsored by them.
Gold Standard for 1 Piece Mounts(04/02/2015)
Badger Ord. has long been a standard in weapon and optic accessories. I have used their M40 rings as well this mount for over 5 years. The fit, finish and accuracy are spot on. There are other quality products on the market, but not at this price point with this pedigree. Hold's Zero on Scar17's, .300WM and .338LM bolt guns without missing a beat. If you don't NEED QD, this is the mount to buy.