Brownells Italia - Il negozio online del più grande rivenditore di componenti e accessori per armi da tiro, difesa e caccia Italia

EGW
DESERT EAGLE (POST 2017) TRIJICON RMR SIGHT MOUNT

841370116898 296000593
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
84.9 84.9 1 EUR
N. prodotto: 296000593
EGW DESERT EAGLE (POST 2017) TRIJICON RMR SIGHT MOUNT
Parti Fabbricante: 49534 841370116898 Materiale: Alluminio 7075 Rivestimento: Hardcoat nero opaco Lunghezza totale: 1.780" Larghezza totale: 1.1" Kit di Montaggio: (2) Viti a testa piatta 6-32, (1) Vite di regolazione 6-32 X 3/16 Compatibilità Red Dot: Trijicon RMR, Holosun HS507C Questo supporto si adatta a: Desert Eagle (Post 2006) EAA Witness Elite Match Questo supporto non è compatibile con: Rock Island 1911s Semplicemente rimuovere il mirino posteriore dalla vostra arma e sostituirlo con il nostro supporto per montare il vostro mirino red dot Trijicon RMR. Non sono necessarie modifiche. Potete rimuovere il nostro supporto e rimettere il vostro mirino posteriore in qualsiasi momento. Hardware di montaggio incluso. Istruzioni di installazione Rimuovere il mirino posteriore* Installare il Supporto Mirino EGW nella coda di rondine Stringere la vite di regolazione (se applicabile) Posizionare il mirino red dot sul Supporto Mirino EGW (inserire un piccolo pezzo di carta tra il mirino red dot e il supporto mirino facilita la rimozione e impedisce che il Loctite entri in contatto con il mirino red dot.) Applicare Loctite blu alle viti di montaggio fornite Stringere le viti di montaggio a 15in/lbs 2 Viti a testa piatta - Fornite per Trijicon RMR Le viti incluse con questo supporto richiedono una chiave a brugola da 5/64'' per l'installazione.
84.9 EUR 0 84,90 € *
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: Magnum Research Colore: Nero Materiale: Alluminio Modello: Desert Eagle Numero di basi: 1 pezzo Tipo: Tattico

Caratteristiche

Adatto per: Magnum Research Colore: Nero Materiale: Alluminio Modello: Desert Eagle Numero di basi: 1 pezzo Tipo: Tattico Peso della spedizione: 0,204kg Altezza di spedizione: 13mm Larghezza di spedizione: 102mm Lunghezza di spedizione: 127mm

Dettagli dell'elemento

Made in Usa



Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
Newsletter