Oltre 300.000 clienti - vi ringraziamo!

Oltre 40.000 prodotti per caccia e sport di tiro

Il BUSHING, GRIP 8000/84F/92SER di BERETTA USA offre una perfetta compatibilità con M9A1 e modelli 92/96, garantendo stabilità e comfort durante l'uso.

BERETTA USA BOCCOLA IMPUGNATURA 8000/84F/92SER

913100488

Caratteristiche

  • Modello:
    8000
    ,
    92
  • Tipo di arma:
    Beretta
  • Peso della spedizione: 0,005kg
  • Larghezza di spedizione: 83mm
  • Lunghezza di spedizione: 146mm
  • Specifiche:
  • Adatto per: Beretta
  • Modello: 92, 8000
0 0 1 EUR

Non disponibile.

N. prodotto: 913100488

N. fab.: C50731

Avvisa quando diventa disponibile 14.9 EUR
0 0 1 EUR
Descrizione Specification Recensioni dei clienti Accessories

BERETTA USA BOCCOLA IMPUGNATURA 8000/84F/92SER

Avvisa quando diventa disponibile

Descrizione:

Mostra originale (inglese)

Scopri il BUSHING per la tua pistola Beretta!

Il BUSHING, GRIP 8000/84F/92SER è un componente essenziale per migliorare la presa e il comfort della tua pistola. Progettato specificamente per i modelli Beretta, offre una soluzione perfetta per gli appassionati di armi e i professionisti del settore.

Compatibilità:

  • M9A1, 9mm
  • Model 92
  • Model 92/96 FS Compact L, 9mm, .40
  • Model 92/96 INOX, 9mm

Non perdere l'opportunità di migliorare la tua esperienza di tiro con questo prodotto di alta qualità. Acquista ora il tuo BUSHING, GRIP 8000/84F/92SER e porta la tua pistola Beretta al livello successivo!



Caratteristiche

  • Modello:
    8000
    ,
    92
  • Tipo di arma:
    Beretta
  • Peso della spedizione: 0,005kg
  • Larghezza di spedizione: 83mm
  • Lunghezza di spedizione: 146mm

Recensioni dei clienti

Valutazioni dei clienti (2)

5 / 5
Assolutamente raccomandato

Brownells USA Taurus 92AF Perfect Fit 10/11/2017

I purchased these for my daughters Taurus 92AF. No issues what so ever. Went in without issue and no problems accepting the new Beretta screws.

Assolutamente raccomandato

Brownells USA A Fine Bushing 16/09/2017

No issues with the bushing or bushing tool - both worked well. As Paul Harvey knew all too well, sometimes it's "the rest of the story". A grip screw broke off in my 92F and I accidentally damaged the bushing threads drilling out the screw. Lesson 1: don't use cheap grip screws (especially not the ones with pre-applied thread locker) Lesson 2: that screw hole is smaller than you think. The 92F has deeply staked bushings that are stubborn to remove, and if those frame threads get damaged, matters go from bad to worse. The bushing would not budge, and the bushing tool started deforming the bushing under increasing pressure. What to do? I filed the top of the bushing smooth (so the screw hole was clean and flush), then drilled the bushing with a 1/8" bit. A #2 screw extractor achieved adequate grip and torque to unscrew the bushing with no damage to the frame threads. The frame and new bushing were cleaned (de-greased) and installed using thread locking compound. Brownell's offers the staking head, but 3 of the 4 92F grip holes are indirect access, so the staking operation may require special equipment. Being able to add a little heat to loosen the thread locker for a "next time", seems the better option for an average Joe handyman.



Lo sapevi?

Informazioni sul produttore

Operatore economico responsabile secondo il regolamento UE

Brownells
Via Dante Alighieri 163
25068 Sarezzo
Italia
service@brownells.it

Ops! Qualcosa è andato storto.

Si è verificato un errore durante il caricamento di questo contenuto. Aggiorna la pagina per continuare. Se il problema persiste, contatta il nostro servizio clienti.

Torna all'inizio