Traduzione automatica (Descrizione originale - Produttore): Attrazioni di polimero montato flattop, basso profilo, distribuire istantaneamente con il semplice tocco di un dito di fornire backup avvistamento se fallisce un ottica primario. Contorni snelle significano niente intoppo sul pennello, fionda o altri attrezzi quando piegato. Altro...
Low-profile, flattop-mounted, polymer sights deploy instantly at the touch of a finger to provide backup sighting if a primary optic fails. Streamlined contours mean there’s nothing to snag on brush, sling, or other gear when folded. Spring-loaded ambidextrous release mechanism lets you hit the grooved tab on either side of the sight to deploy, and lock it in place. Hitting the same tabs retract the sight when you’re done. Uses less than 1" of MIL-STD 1913 Picatinny receiver rail space and locks securely in place with the included steel crossbolt. Provides the same height over bore as standard A2 iron sights. Windage-adjustable rear sight has two apertures: a large, .185" peep and a .070" peep. Designed for AR-type rifles and carbines, fits any weapon with Picatinny rails. Front sight must be mounted on a railed forend on the same plane as the receiver rail to witness correctly with rear sight. Not compatible with railed gas blocks or the MOE handguard.
Reinforced, injection-molded polymer, Black and Flat Dark Earth. Heights measured from top of rail to top of sight. Rear Sight - 1.5” (3.8cm) long deployed, 2.6” (6.8cm) long folded, 1.2” (3cm) wide, .5” (1.3cm) high folded, 1.6” (4cm) high extended. Large aperture, .185” (4.7mm) diameter. Small aperture, .070” (1.8mm) dia. Front Sight - 1.5” long deployed, 2.5” (6.3cm) long folded, 1.2” wide, .5” high folded, 1.5” high extended. Sight post .070" (1.7mm) wide.
Attrazioni di polimero montato flattop, basso profilo, distribuire istantaneamente con il semplice tocco di un dito di fornire backup avvistamento se fallisce un ottica primario. Contorni snelle significano niente intoppo sul pennello, fionda o altri attrezzi quando piegato. Meccanismo a molla sgancio ambidestro consente di colpire la scheda scanalata su entrambi i lati della vista per distribuire e bloccarlo in posizione. Colpire le stesse schede ritrarre la vista quando hai finito. Utilizza meno di 1" spazio di rotaia Picatinny MIL-STD 1913 ricevitore e serrature saldamente sul posto con il crossbolt incluso in acciaio. Fornisce che la stessa altezza sopra portava come luoghi di ferro A2 standard. Tacca di mira regolabile in derivazione ha due aperture: una grande,. 185" peep e un. 070" peep. Progettato per AR-tipo fucili e carabine, si adatta a qualsiasi arma con rotaie di Picatinny. Mirino deve essere montato su un astina inveì sullo stesso piano la ferrovia ricevitore a testimoniare correttamente con tacca di mira. Non compatibile con gas inveì blocchi o il handguard MOE.
Armato, stampato ad iniezione di polimeri, nero e Flat Dark Earth. Altezze misurate dalla parte superiore della rotaia alla parte superiore della vista. Tacca di mira - 1,5"(3,8 cm) lungo distribuito, 2,6" (6.8 cm) lungo piegato, 1,2 (cm 3) ampia,. 5"(1,3 cm) alto piegato, 1,6" (4 cm) alto esteso. Grande apertura,. 185"(4,7 mm) di diametro. Piccola apertura,. 070"(1.8 mm) diametro Mirino - 1,5" lunga distribuito, 2.5"(6,3 cm) lungo piegato, 1,2" larghezza,. 5" alta piegata, 1,5" alta esteso. Vista post. 070"(1.7 mm) larghezza.
Altro...
Punteggi dei clienti per AR-15 Flip-Up MBUS Gen 2 Sight Set Dark Earth
Numero di punteggi: 18
Da brownells.com: 17
Punteggio medio: 4,5
Small Alteration Needed For KeyMod Rail(29/11/2015)
The front site did not flip open without small modification. The deploy button feet would hit against the keymod rail. I dremeled a small notch on each side and it works great. I like the price point and FDE matched my build well. I wish they were flatter but overall happy with them. They provide a nice sight picture and will serve their purpose if ever needed.
High Quality(04/07/2017)
Installed quickly and fits great without any modifications.
Excellent sights!(06/08/2011)
Mounted a set of these on my (don't laugh) S&W 15/22 rifle. They line up perfectly with each other,(unlike the factory supplied cheapies-one leaned one way, one leaned the other). They're lighter weight, and look more "tactical". Aperature quality of the plastic peep could be better, but i'm very pleased with them. They fold down nice and flat, (1/2")so I can use my red-dot sight with no problem.
Nice Low Profile Sight Set(22/08/2011)
Using on a Flat-top full length rail. Lightweight poly tightens down and adjusts height with the provided Key. Really like the way the set deploys in an instant when pressing down on the middle of the sights. Seems to be forgiving to bumps. Changed out the post to a skinnier post with no problems.
Good back up sights(01/09/2011)
The Magpul sights work very well as back up sights. Easy adjustments/zeroing, lightweight, easily indexed through many red dot or holographic sights. I've bought 3 sets of these for my custom builds and find that the sights require very minor adjustment to zero after they are installed on the rifle. I especially like the pop up feature. Release levers are thoughtfully located for both left and right handed shooters, sights open quickly and solidly. The only downside for me is that they are made of a composite material vs. metal - but my sights have survived some pretty hard licks that my red dot scopes did not. I guess is it just a confidence factor. Good sights and Browells has the best price I've found. I most definitely recommend them!
Can't beat them for the money(12/10/2011)
If you are looking at these for the purpose of back-up sights, then look no further. While they are big, they are not too big and weight wise, they are very light. The fact that they are spring loaded is a nice feature and they are accurate. They are easy to sight and I would highly recommend them.
The Best Back Up Sights(03/11/2011)
Magpul really knew what they were doing when it came to the Gen 2 MBUS sights. I installed them in under 5 minutes and it was a breeze to sight them in. **A caution to impatient people.. When either raising/lowering the front sight post, be sure to put a fair amount of downwards pressure, so that you don't put any stress on that little post.** The reason I gave it 4 stars instead of 5 was because that front sight post on mine was poorly made.. However, I called Brownells immediately and they next day aired a new front MBUS sight for free. Best experience with customer service I have ever had. Not many companies can say and back "100% Satisfaction Guaranteed", but Brownells do and did.
Great sights!!(07/12/2011)
For the money, you can not go wrong. The Gen 1s were nice, the Gen 2 are that much better. These are smaller than the Gen 1 and the front sight comes with an adjustment tool. For back-up sights, you can not go wrong at all!
Great sights for a great price!(23/01/2012)
I stayed away from these sights for a long time because they were plastic. I recently broke down a got a set for a subgun that I was building. I am very impressed at the quality and how solid they actually are.
They look great, hold a zero, lay low for use with an optic AND they are just the right height for the application!
Just get a set! You'll like them!
Gambled and won(06/05/2012)
I gambled on magpuls mbus knowing the quality of many other magpul parts i have used on various rifles. I was not let down. I like these sights a whole lot, especially if you use them as a back up iron sight, as the name implies. They work just fine alone and offer a fantastic co-witness with Eotech sights.
Money well spent(08/05/2012)
I originally placed an order for some sights directly from the manufacturer of my rifle. After three months of not getting my sights I decided to order these. I was apprehensive at first but the very first thing I noticed when taking them out of the box was the weight. Though not heavy, the sights weighed more than I thought a piece of "plastic" would. I immediately mounted the sights using some "removable nut lock". The sights are still on my duty rifle and doing great. I have not had any issues with them and would buy them for another rifle. They are low profile and high quality.
Better than the original(23/05/2012)
I have both the original and Gen 2 MBUS sights in different color to match the furniture of my tactical rifles. The new Gen 2 is as rugged and more streamlined in profile compared to the original. What I like most on the Gen 2 is the better sight picture of the peep sight and the push button locking mechanism of the front sight post. Compared to other polymer BUIS out there, the Magpul MBUS is as as good as it gets.
Nice set(19/01/2014)
The set is very good and nicely priced compared to metal BUIS made by other companies. Peep aperture could be a little better and the elevation adjustment tool for the front sight is poorly constructed (buy a metal one) as it lost two teeth upon its first use. Installation wasn't smooth as I expected. I had to force (with the aid of a rubber hammer, gently, to not damage the sights)it on my noveske quad rail. Excepts that they work like a charm.
Nice Set ,Fast Fix(03/08/2014)
I needed these to shoot and get ready for break-in factor.They are just what I'm looking for.Will get a scope on next.You really can't ask for a better set for the money...
Nice Sights(30/12/2014)
I bought a pair of these to use on a new AR-15 build. On this build I used an Adams Arms piston kit together with the Samson Handguard that has a cut out for the piston gas block. Because the top of the gas block is slightly lower than the top of the handguard rail, the front site will not fold down flat all the way. Other than that they seem to be good sights. I will use them on another project.
Awesome(11/03/2015)
I bought a cheap set of iron sights on Ebay and was not impressed. Did my homework, read the reviews and decided to spring for a set of these Magpul sights. I must say I was impressed when they showed up. They are really nice. Well constructed, look great and were easy to install. Some of the other reviews mentioned that they were tight and they had to hammer them into place. I had no trouble installing them without banging on them. Perfect co-witness with my Vortex StrikeFire optics. I have no negatives for now and only time and use will tell if there are any. For now I am a happy camper and would recommend these sights.
good produvt(28/07/2015)
these sights came with my AR, they are pretty simple to use and low profile. I have nothing to complain about. great for back up sights!
Polimeriche come backup..(23/06/2018)
Se volete delle backup a prezzo contenuto, le Buis di Magpul sono la scelta giusta (ma sono altrettanto valide anche le MFT) soprattutto per uso ludico ed addestrativo.. Io personalmente non le amo molto, hanno il flipup ambidestro.. però almeno per quanto mi riguarda le trovo troppo grandi.. come linee preferisco la versione PRO
100007327 AR-15 Flip-Up MBUS Gen 2 Sight Set Dark Earth Attrazioni di polimero montato flattop, basso profilo, distribuire istantaneamente con il semplice tocco di un dito di fornire backup avvistamento se fallisce un ottica primario. Contorni snelle significano niente intoppo sul pennello, fionda o altri attrezzi quando piegato. Meccanismo a molla sgancio ambidestro consente di colpire la scheda scanalata su entrambi i lati della vista per distribuire e bloccarlo in posizione. Colpire le stesse schede ritrarre la vista quando hai finito. Utilizza meno di 1" spazio di rotaia Picatinny MIL-STD 1913 ricevitore e serrature saldamente sul posto con il crossbolt incluso in acciaio. Fornisce che la stessa altezza sopra portava come luoghi di ferro A2 standard. Tacca di mira regolabile in derivazione ha due aperture: una grande,. 185" peep e un. 070" peep. Progettato per AR-tipo fucili e carabine, si adatta a qualsiasi arma con rotaie di Picatinny. Mirino deve essere montato su un astina inveì sullo stesso piano la ferrovia ricevitore a testimoniare correttamente con tacca di mira. Non compatibile con gas inveì blocchi o il handguard MOE.
109.2EUR7109,20 €
*
7 disponibili presso il magazzino Brownells USA
Caratteristiche:Adatto per: AR-15Colore: Dark EarthTipo: Flip-Up
Adatto per:
AR-15
Colore:
Dark Earth
Tipo:
Flip-Up
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.y.3.
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
100006941 AR-15 Flip-Up MBUS Gen 2 Sight Set Black Attrazioni di polimero montato flattop, basso profilo, distribuire istantaneamente con il semplice tocco di un dito di fornire backup avvistamento se fallisce un ottica primario. Contorni snelle significano niente intoppo sul pennello, fionda o altri attrezzi quando piegato. Meccanismo a molla sgancio ambidestro consente di colpire la scheda scanalata su entrambi i lati della vista per distribuire e bloccarlo in posizione. Colpire le stesse schede ritrarre la vista quando hai finito. Utilizza meno di 1" spazio di rotaia Picatinny MIL-STD 1913 ricevitore e serrature saldamente sul posto con il crossbolt incluso in acciaio. Fornisce che la stessa altezza sopra portava come luoghi di ferro A2 standard. Tacca di mira regolabile in derivazione ha due aperture: una grande,. 185" peep e un. 070" peep. Progettato per AR-tipo fucili e carabine, si adatta a qualsiasi arma con rotaie di Picatinny. Mirino deve essere montato su un astina inveì sullo stesso piano la ferrovia ricevitore a testimoniare correttamente con tacca di mira. Non compatibile con gas inveì blocchi o il handguard MOE.
100015975 AR-15 Flip-Up MBUS Gen 2 Sight Set Grey Attrazioni di polimero montato flattop, basso profilo, distribuire istantaneamente con il semplice tocco di un dito di fornire backup avvistamento se fallisce un ottica primario. Contorni snelle significano niente intoppo sul pennello, fionda o altri attrezzi quando piegato. Meccanismo a molla sgancio ambidestro consente di colpire la scheda scanalata su entrambi i lati della vista per distribuire e bloccarlo in posizione. Colpire le stesse schede ritrarre la vista quando hai finito. Utilizza meno di 1" spazio di rotaia Picatinny MIL-STD 1913 ricevitore e serrature saldamente sul posto con il crossbolt incluso in acciaio. Fornisce che la stessa altezza sopra portava come luoghi di ferro A2 standard. Tacca di mira regolabile in derivazione ha due aperture: una grande,. 185" peep e un. 070" peep. Progettato per AR-tipo fucili e carabine, si adatta a qualsiasi arma con rotaie di Picatinny. Mirino deve essere montato su un astina inveì sullo stesso piano la ferrovia ricevitore a testimoniare correttamente con tacca di mira. Non compatibile con gas inveì blocchi o il handguard MOE.
100018407 AR-15 Flip-Up MBUS Gen 2 Sight Set O.D. Green Attrazioni di polimero montato flattop, basso profilo, distribuire istantaneamente con il semplice tocco di un dito di fornire backup avvistamento se fallisce un ottica primario. Contorni snelle significano niente intoppo sul pennello, fionda o altri attrezzi quando piegato. Meccanismo a molla sgancio ambidestro consente di colpire la scheda scanalata su entrambi i lati della vista per distribuire e bloccarlo in posizione. Colpire le stesse schede ritrarre la vista quando hai finito. Utilizza meno di 1" spazio di rotaia Picatinny MIL-STD 1913 ricevitore e serrature saldamente sul posto con il crossbolt incluso in acciaio. Fornisce che la stessa altezza sopra portava come luoghi di ferro A2 standard. Tacca di mira regolabile in derivazione ha due aperture: una grande,. 185" peep e un. 070" peep. Progettato per AR-tipo fucili e carabine, si adatta a qualsiasi arma con rotaie di Picatinny. Mirino deve essere montato su un astina inveì sullo stesso piano la ferrovia ricevitore a testimoniare correttamente con tacca di mira. Non compatibile con gas inveì blocchi o il handguard MOE.
Low-profile, flattop-mounted, polymer sights deploy instantly at the touch of a finger to provide backup sighting if a primary optic fails. Streamlined contours mean there’s nothing to snag on brush, sling, or other gear when folded. Spring-loaded ambidextrous release mechanism lets you hit the grooved tab on either side of the sight to deploy, and lock it in place. Hitting the same tabs retract the sight when you’re done. Uses less than 1" of MIL-STD 1913 Picatinny receiver rail space and locks securely in place with the included steel crossbolt. Provides the same height over bore as standard A2 iron sights. Windage-adjustable rear sight has two apertures: a large, .185" peep and a .070" peep. Designed for AR-type rifles and carbines, fits any weapon with Picatinny rails. Front sight must be mounted on a railed forend on the same plane as the receiver rail to witness correctly with rear sight. Not compatible with railed gas blocks or the MOE handguard.
Reinforced, injection-molded polymer, Black and Flat Dark Earth. Heights measured from top of rail to top of sight. Rear Sight - 1.5” (3.8cm) long deployed, 2.6” (6.8cm) long folded, 1.2” (3cm) wide, .5” (1.3cm) high folded, 1.6” (4cm) high extended. Large aperture, .185” (4.7mm) diameter. Small aperture, .070” (1.8mm) dia. Front Sight - 1.5” long deployed, 2.5” (6.3cm) long folded, 1.2” wide, .5” high folded, 1.5” high extended. Sight post .070" (1.7mm) wide.
Attrazioni di polimero montato flattop, basso profilo, distribuire istantaneamente con il semplice tocco di un dito di fornire backup avvistamento se fallisce un ottica primario. Contorni snelle significano niente intoppo sul pennello, fionda o altri attrezzi quando piegato. Meccanismo a molla sgancio ambidestro consente di colpire la scheda scanalata su entrambi i lati della vista per distribuire e bloccarlo in posizione. Colpire le stesse schede ritrarre la vista quando hai finito. Utilizza meno di 1" spazio di rotaia Picatinny MIL-STD 1913 ricevitore e serrature saldamente sul posto con il crossbolt incluso in acciaio. Fornisce che la stessa altezza sopra portava come luoghi di ferro A2 standard. Tacca di mira regolabile in derivazione ha due aperture: una grande,. 185" peep e un. 070" peep. Progettato per AR-tipo fucili e carabine, si adatta a qualsiasi arma con rotaie di Picatinny. Mirino deve essere montato su un astina inveì sullo stesso piano la ferrovia ricevitore a testimoniare correttamente con tacca di mira. Non compatibile con gas inveì blocchi o il handguard MOE.
Armato, stampato ad iniezione di polimeri, nero e Flat Dark Earth. Altezze misurate dalla parte superiore della rotaia alla parte superiore della vista. Tacca di mira - 1,5"(3,8 cm) lungo distribuito, 2,6" (6.8 cm) lungo piegato, 1,2 (cm 3) ampia,. 5"(1,3 cm) alto piegato, 1,6" (4 cm) alto esteso. Grande apertura,. 185"(4,7 mm) di diametro. Piccola apertura,. 070"(1.8 mm) diametro Mirino - 1,5" lunga distribuito, 2.5"(6,3 cm) lungo piegato, 1,2" larghezza,. 5" alta piegata, 1,5" alta esteso. Vista post. 070"(1.7 mm) larghezza.
Altro...
Punteggi dei clienti per AR-15 Flip-Up MBUS Gen 2 Sight Set Dark Earth
Numero di punteggi: 18
Da brownells.com: 17
Punteggio medio: 4,5
Small Alteration Needed For KeyMod Rail(29/11/2015)
The front site did not flip open without small modification. The deploy button feet would hit against the keymod rail. I dremeled a small notch on each side and it works great. I like the price point and FDE matched my build well. I wish they were flatter but overall happy with them. They provide a nice sight picture and will serve their purpose if ever needed.
High Quality(04/07/2017)
Installed quickly and fits great without any modifications.
Excellent sights!(06/08/2011)
Mounted a set of these on my (don't laugh) S&W 15/22 rifle. They line up perfectly with each other,(unlike the factory supplied cheapies-one leaned one way, one leaned the other). They're lighter weight, and look more "tactical". Aperature quality of the plastic peep could be better, but i'm very pleased with them. They fold down nice and flat, (1/2")so I can use my red-dot sight with no problem.
Nice Low Profile Sight Set(22/08/2011)
Using on a Flat-top full length rail. Lightweight poly tightens down and adjusts height with the provided Key. Really like the way the set deploys in an instant when pressing down on the middle of the sights. Seems to be forgiving to bumps. Changed out the post to a skinnier post with no problems.
Good back up sights(01/09/2011)
The Magpul sights work very well as back up sights. Easy adjustments/zeroing, lightweight, easily indexed through many red dot or holographic sights. I've bought 3 sets of these for my custom builds and find that the sights require very minor adjustment to zero after they are installed on the rifle. I especially like the pop up feature. Release levers are thoughtfully located for both left and right handed shooters, sights open quickly and solidly. The only downside for me is that they are made of a composite material vs. metal - but my sights have survived some pretty hard licks that my red dot scopes did not. I guess is it just a confidence factor. Good sights and Browells has the best price I've found. I most definitely recommend them!
Can't beat them for the money(12/10/2011)
If you are looking at these for the purpose of back-up sights, then look no further. While they are big, they are not too big and weight wise, they are very light. The fact that they are spring loaded is a nice feature and they are accurate. They are easy to sight and I would highly recommend them.
The Best Back Up Sights(03/11/2011)
Magpul really knew what they were doing when it came to the Gen 2 MBUS sights. I installed them in under 5 minutes and it was a breeze to sight them in. **A caution to impatient people.. When either raising/lowering the front sight post, be sure to put a fair amount of downwards pressure, so that you don't put any stress on that little post.** The reason I gave it 4 stars instead of 5 was because that front sight post on mine was poorly made.. However, I called Brownells immediately and they next day aired a new front MBUS sight for free. Best experience with customer service I have ever had. Not many companies can say and back "100% Satisfaction Guaranteed", but Brownells do and did.
Great sights!!(07/12/2011)
For the money, you can not go wrong. The Gen 1s were nice, the Gen 2 are that much better. These are smaller than the Gen 1 and the front sight comes with an adjustment tool. For back-up sights, you can not go wrong at all!
Great sights for a great price!(23/01/2012)
I stayed away from these sights for a long time because they were plastic. I recently broke down a got a set for a subgun that I was building. I am very impressed at the quality and how solid they actually are.
They look great, hold a zero, lay low for use with an optic AND they are just the right height for the application!
Just get a set! You'll like them!
Gambled and won(06/05/2012)
I gambled on magpuls mbus knowing the quality of many other magpul parts i have used on various rifles. I was not let down. I like these sights a whole lot, especially if you use them as a back up iron sight, as the name implies. They work just fine alone and offer a fantastic co-witness with Eotech sights.
Money well spent(08/05/2012)
I originally placed an order for some sights directly from the manufacturer of my rifle. After three months of not getting my sights I decided to order these. I was apprehensive at first but the very first thing I noticed when taking them out of the box was the weight. Though not heavy, the sights weighed more than I thought a piece of "plastic" would. I immediately mounted the sights using some "removable nut lock". The sights are still on my duty rifle and doing great. I have not had any issues with them and would buy them for another rifle. They are low profile and high quality.
Better than the original(23/05/2012)
I have both the original and Gen 2 MBUS sights in different color to match the furniture of my tactical rifles. The new Gen 2 is as rugged and more streamlined in profile compared to the original. What I like most on the Gen 2 is the better sight picture of the peep sight and the push button locking mechanism of the front sight post. Compared to other polymer BUIS out there, the Magpul MBUS is as as good as it gets.
Nice set(19/01/2014)
The set is very good and nicely priced compared to metal BUIS made by other companies. Peep aperture could be a little better and the elevation adjustment tool for the front sight is poorly constructed (buy a metal one) as it lost two teeth upon its first use. Installation wasn't smooth as I expected. I had to force (with the aid of a rubber hammer, gently, to not damage the sights)it on my noveske quad rail. Excepts that they work like a charm.
Nice Set ,Fast Fix(03/08/2014)
I needed these to shoot and get ready for break-in factor.They are just what I'm looking for.Will get a scope on next.You really can't ask for a better set for the money...
Nice Sights(30/12/2014)
I bought a pair of these to use on a new AR-15 build. On this build I used an Adams Arms piston kit together with the Samson Handguard that has a cut out for the piston gas block. Because the top of the gas block is slightly lower than the top of the handguard rail, the front site will not fold down flat all the way. Other than that they seem to be good sights. I will use them on another project.
Awesome(11/03/2015)
I bought a cheap set of iron sights on Ebay and was not impressed. Did my homework, read the reviews and decided to spring for a set of these Magpul sights. I must say I was impressed when they showed up. They are really nice. Well constructed, look great and were easy to install. Some of the other reviews mentioned that they were tight and they had to hammer them into place. I had no trouble installing them without banging on them. Perfect co-witness with my Vortex StrikeFire optics. I have no negatives for now and only time and use will tell if there are any. For now I am a happy camper and would recommend these sights.
good produvt(28/07/2015)
these sights came with my AR, they are pretty simple to use and low profile. I have nothing to complain about. great for back up sights!
Polimeriche come backup..(23/06/2018)
Se volete delle backup a prezzo contenuto, le Buis di Magpul sono la scelta giusta (ma sono altrettanto valide anche le MFT) soprattutto per uso ludico ed addestrativo.. Io personalmente non le amo molto, hanno il flipup ambidestro.. però almeno per quanto mi riguarda le trovo troppo grandi.. come linee preferisco la versione PRO