Il Carrello è vuoto.

Carrello

0364 1955 195

Iscriviti alla Newsletter

EGW
1911 COMPETITION SEAR

841370100347 296100002

Ultra-Hard, Machined Tool Steel Sear For Long-Lasting Match-Quality Triggers

Ultra-hard sear gives a clean-breaking, light-feeling trigger pull with little or no time-consuming stoning—can be installed straight out of the package in many cases. Precision CNC-machined from tool steel barstock, then ground for precise geometry to ensure correct sear angle for full hammer/sear engagement. Hardened to Rc 55 for exceptionally long life, so your trigger job lasts longer.

SPECS: Machined tool steel, in-the-white. Fits 1911 Auto only.

Altro...

Sear in Acciaio Ultra-Duro e Lavorato per Grilletti di Qualità da Competizione e Lunga Durata

Il sear ultra-duro offre una sensazione di scatto pulito e leggero, con poca o nessuna necessità di levigatura—può essere installato direttamente dalla confezione in molti casi. Fresato con precisione CNC da barre di acciaio per utensili e poi rettificato per una geometria precisa per garantire l'angolo corretto del sear per un completo ingaggio tra martello e sear. Indurito a Rc 55 per una durata eccezionalmente lunga, così il lavoro di regolazione del grilletto dura più a lungo.

SPECIFICHE: Acciaio per utensili lavorato a macchina, grezzo. Compatibile solo con 1911 Auto.

Altro...

Punteggi dei clienti per EGW 1911 AUTO SEAR

Numero di punteggi: 14
Da brownells.com: 14
Punteggio medio: 5

Great Product (18/04/2011)

I installed an EGW sear in my 1911 Springfield Armory project gun and I couldn't be happier with the result. I bought the sear along with the Brownells sear jig and an extra-fine stone.
After stoning in the jig and cutting the relief angle, the sear installed in a snap, passed function testing, and fired 150 rounds...superb performance! Used with a Wilson ultra-light hammer with hooks @ 0.20.

EGW 1911 Auto Sear (11/08/2011)

EGW is the best 1911 sear you can use. Fully manufactured in house and hardened to a point that will outlast the gun itself, takes a honed edge and holds it. A must have in any 1911.

EGW Sear (12/10/2011)

The best sear to ever hit the market. As with all EGW products they do it right the first time and offer only one grade product at a very reasonable price. Not three sears and hammers like the big name smiths with economy, mid range and pre bullet proof or hard core as these are the best. Perfect hardness and hold an edge for the life of the gun and the next one to follow with 100000s rounds +. Can be used with no relief and short hooks or a relief angle and a well tuned matching EGW hammer for the best of the best combination.

Best sear on the market (26/01/2012)

I've used various sears, but this one is the best. It is not the lightest, but it is the hardest. This one will last forever. I recommend this sear for any trigger weight down to about 2 lbs., so this is the one for you probably 99% of the time.

Highly Advise, excellent sear! (24/05/2012)

Nice sear required very little stoning to get it into shape. Thumb safety operation ok after installing this sear into pistol.

This product delivers. (16/08/2012)

I bought this sear based on the feedback I read. Everything was true. This is a quality part. Perfect dimensions, The breakaway angle is already cut, the contact face is polished and super hard. I matched this up with my favorite hammer, Wilson's Ultra Light Match Hammer at 20/1000ths. I easily got a safe, 2 1/2 lb. trigger on my Springfield TRP. Impressive product from EGW.

Excellent Sear (13/04/2013)

Replaced my factory Colt XSE with this sear and the results are amazing. This sear came polished with the correct angles and NO work to be done. My trigger pull fell to 3.5 lbs. In addition you get the very hard steel that will last many years and not lose its sear angles.
Thumb safety fit back in perfect with no adjustment needed.
Great Sear, I highly recommend it!

Nothing better... (16/06/2013)

Title says it all. Perfect consistency in finish and dimension means I can count on the EGW sear to fit exactly how I expect it to, without even having it in my hands. More than long enough to use with a TR sear jig if you choose.
Had the hardness independently checked... and it's spot on. I keep 3-4 on hand at all times... and if I measured the nose length on all 4, I doubt they'd be more than .0002" of each other in variance. Iv'e actually been using these for over 15 years, just got around to reviewing. Perfect compliment to the ball head disco.

This is THE ONE !! (25/01/2014)

IF you have no apptitude for polishing sear angles (like me)this sear is as good as it gets. I tried using an STI but the safety pad was WAY too big and I got sear bounce. The EGW dropped right in and coupled with a Colt sear spring got me a clean 3lb trigger on my SA Loaded.Best 1911 part I've ever bought,period.

The Industry's Finest Sear! (10/07/2015)

My business specializes in repair, customization and custom builds of 1911s. The geometry, fit and function of this Sear is superior to all others on the market, and I've tried them all! As stated earlier in another write up, best results will be obtained with mating to either an EGW Hammer, or to another parts manufacturer's 1911 Hammer, which uses the same dimensional geometry as EGW's (Hint: Their name begins with the letter "A"). The EGW Sear's heat treating and finish is without peer!! An extraordinary value!!

Quality sear (04/08/2015)

The stock trigger pull on my Ruger CMD was about 5.5lbs with some creep and grittiness. The EGW sear dropped in with no fitting and combined with a 19lb mainspring and a Colt sear spring I have a clean break with zero creep and its much lighter. I'm buying another to install in my Springfield.

Drop in, no smithing, much smoother pull (19/11/2015)

Remington 1911 R1. Stock trigger had a rough pull. Before buying the full trigger job kit, I wanted to try a simpler solution. The EGW sear dropped right in and made a major improvement. Zero smithing required.

On a side note, I also tried installing the series 80 to 70 conversion. That didn't do it, but the new sear did.

EGW they mean what they say (13/08/2017)

I look at what's out there and with out mentioning any names its not so much the product as the customer service, and I understand that people are very busy in their smithing and machining work that there is little time for chet chat but when I ever needed advice on a product or have a problem and leave a message they always come back with an answer ready to help, yup EGW they get the job done, thanks EGW.

Very nice 1911 sear (26/08/2018)

This is a very nice and tough sear. Out of the bag, it requires virtually zero stoning, or other fitting. I've used this in a re-build, with new trigger, disconnect, hammer and sear spring, and it really makes the trigger just right. No slop, no creep, nice clean break. Hope that info helps!

Leggi più recensioni su brownells.com

54.9 54.9 1 EUR

N. prodotto: 296100002
EGW 1911 AUTO SEAR
Parti Fabbricante: 10040 841370100347 Il sear ultra-duro offre una sensazione di scatto pulito e leggero, con poca o nessuna necessità di levigatura—può essere installato direttamente dalla confezione in molti casi. Fresato con precisione CNC da barre di acciaio per utensili e poi rettificato per una geometria precisa per garantire l'angolo corretto del sear per un completo ingaggio tra martello e sear. Indurito a Rc 55 per una durata eccezionalmente lunga, così il lavoro di regolazione del grilletto dura più a lungo.

54.9 EUR 44 54,90 € *

Tempi di consegna circa 12-16 giorni.
Più di 10 pz. nel magazzino USA

Caratteristiche: Adatto per: 1911 Modello: Government, Commander, Officers

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

Il sear ultra-duro offre una sensazione di scatto pulito e leggero, spesso senza necessità di levigatura.
Fresato con precisione CNC e indurito a Rc 55 per una durata eccezionalmente lunga.
Compatibile solo con 1911 Auto, adatto per i modelli Government, Commander, e Officers.

Caratteristiche

Adatto per: 1911 Modello: Commander,Government,Officers Peso della spedizione: 0,005kg Altezza di spedizione: 8mm Larghezza di spedizione: 76mm Lunghezza di spedizione: 124mm UPC : 841370100347

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.c

🔧 Il sear ultra-duro EGW 1911 COMPETITION offre uno scatto pulito e leggero, pronto all'uso. Compatibile con modelli 1911. Scopri di più! 🛠️

Ultra-Hard, Machined Tool Steel Sear For Long-Lasting Match-Quality Triggers

SPECS: Machined tool steel, in-the-white. Fits 1911 Auto only.

Altro...

Sear in Acciaio Ultra-Duro e Lavorato per Grilletti di Qualità da Competizione e Lunga Durata

SPECIFICHE: Acciaio per utensili lavorato a macchina, grezzo. Compatibile solo con 1911 Auto.

Altro...

Punteggi dei clienti per EGW 1911 AUTO SEAR

Numero di punteggi: 14
Da brownells.com: 14
Punteggio medio: 5

Great Product (18/04/2011)

EGW 1911 Auto Sear (11/08/2011)

EGW is the best 1911 sear you can use. Fully manufactured in house and hardened to a point that will outlast the gun itself, takes a honed edge and holds it. A must have in any 1911.

EGW Sear (12/10/2011)

Best sear on the market (26/01/2012)

Highly Advise, excellent sear! (24/05/2012)

Nice sear required very little stoning to get it into shape. Thumb safety operation ok after installing this sear into pistol.

This product delivers. (16/08/2012)

Excellent Sear (13/04/2013)

Nothing better... (16/06/2013)

This is THE ONE !! (25/01/2014)

The Industry's Finest Sear! (10/07/2015)

Quality sear (04/08/2015)

Drop in, no smithing, much smoother pull (19/11/2015)

EGW they mean what they say (13/08/2017)

Very nice 1911 sear (26/08/2018)

Leggi più recensioni su brownells.com

Scelti da altri clientie
In alternativa

NOWLIN MATCH SEAR SPRING
1911 MATCH GRADE SPRING

NOWLIN

In magazzino

23,90 € *

Molle sear

Migliora le prestazioni della tua 1911 con il Disconnettore HD Ball Head di EGW. Elimina il clic e ottimizza il grilletto. Scopri di più! 🔧✨

EGW HD BALL HEAD DISCONNECTOR
HD BALL HEAD DISCONNECTOR

EGW

Riordinato

46,90 € *

Disconnettore

DOUG KOENIG SHOOTING SPORTS PREMIUM HAMMER
1911 LOW MASS HAMMER

DOUG KOENIG SHOOTING SPORTS

In magazzino

169,90 € *

Cane

CYLINDER & SLIDE 1911 LIGHT PULL SEAR SPRING
1911 LIGHT PULL SEAR SPRING

CYLINDER & SLIDE

In magazzino

28,90 € *

Molle sear

4,6

13 LB. WOLFF VARIABLE POWER SPRING FOR GOVT. MODEL
GOVERNMENT MODEL VARIABLE POWER RECOIL SPRING

WOLFF

In magazzino

29,90 € * 27,90 € - 94,90 €*

Molla di recupero

Accesso

Hai dimenticato la password?
Registrati

Social Media

Brownells.it

Catalogo prodotti

Ordinare

Customer Service

Benvenuti!

Benvenuti su Brownells.it, il principale rivenditore online di accessori per armi da fuoco, componenti di pistole e utensili per armaioli in Italia!

La nostra offerta

Se ti piace sparare, lavorare sulle armi da fuoco come artigiano o per hobby, o semplicemente possiedi un'arma, questo è il posto per te!

Grazie alla nostra grande esperienza, ogni giorno, tiratori, armaioli professionisti, hobbisti, militari, esponenti delle forze dell'ordine e appassionati d'armi si rivolgono a Brownells.it per trovare accessori e componenti di alta qualità e fare rifornimento di ciò di cui hanno bisogno.

Nel nostro negozio online potrai trovare oltre 60.000 prodotti, tra cui parti d'arma, accessori, utensili per armieri, materiale per ricarica e componenti di munizioni, e altri prodotti per mantenere, riparare e aggiornare le tue armi.