Brownells Italia - Il negozio online del più grande rivenditore di componenti e accessori per armi da tiro, difesa e caccia Italia
851064007005 100019371
The Scarging handle fits both 5.56 and 7.62 NATO versions of the SCAR, and installs in seconds.The radius-faced design, and swept geometry of the Scarging Handle allows the user to achieve a more solid grasp when manipulating the bolt. This allows for easier charging, clearing of stoppages, and administratively locking the firearm bolt to the rear. The shooter can choose between left or right side installation to match their hand dominance, and can rotate the Scarging Handle to either downward or upward sweep. The downward sweep protects the hand from “busted knuckles” due to optics mounts by keeping it down and away from the weapon’s top. This also has the added benefit of additional leverage gained, and increased grasping surface for larger hands or when wearing gloves.  The Scarging handle can alternatively be installed with the curve upward, which provides the user a slick side receiver to prevent snagging or “SCAR Thumb” (i.e. having the reciprocating charging handle strike your hand when using a magwell hold or unconventional shooting method). All Scarging Handles are constructed of low carbon 1080 steel, and finished with a durable black, mil-spec finish. The accessory protrudes less distance from the receiver than the factory unit, and is profiled to be snag-resistant when wearing body armor or other gear.

SPECS: Works on all 7.62 and 5.56 SCAR models, Black FInish, Ambidextrous for Left or Right Hand Shooters, Materials: Material: Low Carbon Steel, Finish: Non-Reflective Black Milspec Finish 100% Made in the USA.

99.9 109.9 2 EUR
N. prodotto: 100019371
KINETIC DEVELOPMENT GROUP SCAR AMBIDEXTROUS CHARGING HANDLE, BLACK
Parti Fabbricante: SCP5020 851064007005 La maniglia di armamento Scarging è compatibile sia con le versioni NATO 5.56 che 7.62 del SCAR e si installa in pochi secondi. Il design con faccia a raggio e la geometria inclinata della maniglia Scarging permettono all'utente di ottenere una presa più solida durante la manipolazione del carrello. Questo facilita l'armamento, la risoluzione di inceppamenti e il bloccaggio amministrativo del carrello dell'arma in posizione arretrata. Il tiratore può scegliere di installare la maniglia Scarging sul lato sinistro o destro a seconda della propria dominanza manuale, e può ruotarla per una spazzata verso il basso o verso l'alto. La spazzata verso il basso protegge la mano da 'nocche colpite' a causa delle montature ottiche mantenendola in basso e lontano dalla parte superiore dell'arma. Questo offre anche il vantaggio di una leva aggiuntiva guadagnata e una superficie di presa maggiore per mani più grandi o quando si indossano guanti. La maniglia Scarging può in alternativa essere installata con la curva verso l'alto, il che fornisce all'utente un lato del ricevitore liscio per prevenire l'aggancio o il 'Pollice da SCAR' (ossia avere la maniglia di armamento reciprocante che colpisce la tua mano quando si utilizza una presa sul magwell o un metodo di tiro non convenzionale). Tutte le maniglie Scarging sono costruite in acciaio a basso tenore di carbonio 1080 e finite con una resistente finitura nera conforme alle specifiche militari. L'accessorio sporge meno dalla carcassa rispetto all'unità di fabbrica e ha un profilo studiato per essere resistente agli agganci quando si indossa un'armatura corporea o altre attrezzature.
99.9 EUR 7 99,90 € *
Tempi di consegna circa 12-16 giorni.
7 pz. nel magazzino USA
Caratteristiche: Adatto per: FN Finitura: Nero Mano: Ambidestro Modello: SCAR 16, SCAR 17

Caratteristiche

Adatto per: FN Finitura: Nero Mano: Ambidestro Modello: SCAR 16,SCAR 17 Peso della spedizione: 0,032kg Altezza di spedizione: 28mm Larghezza di spedizione: 76mm Lunghezza di spedizione: 104mm

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.x



N. prodotto: 100035908
KINETIC DEVELOPMENT GROUP SCAR AMBIDEXTROUS CHARGING HANDLE, FDE
Parti Fabbricante: SCP5021 851064007456 La maniglia di armamento Scarging è compatibile sia con le versioni NATO 5.56 che 7.62 del SCAR e si installa in pochi secondi. Il design con faccia a raggio e la geometria inclinata della maniglia Scarging permettono all'utente di ottenere una presa più solida durante la manipolazione del carrello. Questo facilita l'armamento, la risoluzione di inceppamenti e il bloccaggio amministrativo del carrello dell'arma in posizione arretrata. Il tiratore può scegliere di installare la maniglia Scarging sul lato sinistro o destro a seconda della propria dominanza manuale, e può ruotarla per una spazzata verso il basso o verso l'alto. La spazzata verso il basso protegge la mano da 'nocche colpite' a causa delle montature ottiche mantenendola in basso e lontano dalla parte superiore dell'arma. Questo offre anche il vantaggio di una leva aggiuntiva guadagnata e una superficie di presa maggiore per mani più grandi o quando si indossano guanti. La maniglia Scarging può in alternativa essere installata con la curva verso l'alto, il che fornisce all'utente un lato del ricevitore liscio per prevenire l'aggancio o il 'Pollice da SCAR' (ossia avere la maniglia di armamento reciprocante che colpisce la tua mano quando si utilizza una presa sul magwell o un metodo di tiro non convenzionale). Tutte le maniglie Scarging sono costruite in acciaio a basso tenore di carbonio 1080 e finite con una resistente finitura nera conforme alle specifiche militari. L'accessorio sporge meno dalla carcassa rispetto all'unità di fabbrica e ha un profilo studiato per essere resistente agli agganci quando si indossa un'armatura corporea o altre attrezzature.
109.9 EUR 13 109,90 € *
Tempi di consegna circa 12-16 giorni.
Più di 10 pz. nel magazzino USA
Caratteristiche: Adatto per: FN Finitura: Flat Dark Earth Mano: Ambidestro Modello: SCAR 16, SCAR 17
The Scarging handle fits both 5.56 and 7.62 NATO versions of the SCAR, and installs in seconds.The radius-faced design, and swept geometry of the Scarging Handle allows the user to achieve a more solid grasp when manipulating the bolt. This allows for easier charging, clearing of stoppages, and administratively locking the firearm bolt to the rear. The shooter can choose between left or right side installation to match their hand dominance, and can rotate the Scarging Handle to either downward or upward sweep. The downward sweep protects the hand from “busted knuckles” due to optics mounts by keeping it down and away from the weapon’s top. This also has the added benefit of additional leverage gained, and increased grasping surface for larger hands or when wearing gloves.  The Scarging handle can alternatively be installed with the curve upward, which provides the user a slick side receiver to prevent snagging or “SCAR Thumb” (i.e. having the reciprocating charging handle strike your hand when using a magwell hold or unconventional shooting method). All Scarging Handles are constructed of low carbon 1080 steel, and finished with a durable black, mil-spec finish. The accessory protrudes less distance from the receiver than the factory unit, and is profiled to be snag-resistant when wearing body armor or other gear.

SPECS: Works on all 7.62 and 5.56 SCAR models, Black FInish, Ambidextrous for Left or Right Hand Shooters, Materials: Material: Low Carbon Steel, Finish: Non-Reflective Black Milspec Finish 100% Made in the USA.

Newsletter