The high profile Vickers Elite Battlesight rear has a .145” wide, deep U-Notch for optimum sighting in low-light, dynamic range conditions and is a perfect match to our .125” wide front sights. The concave non-reflective rear blade is serrated 40 lines per inch, while the notch area is recessed into a semi-circular pocket for a crisp, protected sight picture. Two hardened set-screws ensure this sight will never shoot loose under the most demanding conditions. This snag-free rear sight also has a shelf shape that enables one-hand slide cycling or malfunction clearance and a rugged, non-reflective matte black parkerized finish.
Altro...
Il mirino posteriore di alto profilo Vickers Elite Battlesight ha un'ampia tacca a U profonda .145”, ottimale per la mira in condizioni di scarsa luminosità e dinamiche di tiro, ed è il complemento perfetto per i nostri mirini anteriori larghi .125”. La lama posteriore concava non riflettente è zigrinata 40 linee per pollice, mentre l'area della tacca è incassata in una tasca semicircolare per un'immagine di mira nitida e protetta. Due viti di fissaggio indurite garantiscono che questo mirino non si allenti mai sotto le condizioni più esigenti. Questo mirino posteriore senza sporgenze ha anche una forma a mensola che consente il ciclismo della slitta con una mano o la risoluzione di malfunzionamenti e un robusto finito opaco nero parkerizzato non riflettente.
Altro...
Punteggi dei clienti per WILSON COMBAT VICKERS ELITE BATTLESIGHT FOR GLOCK 42/43
Numero di punteggi: 1
Da brownells.com: 1
Punteggio medio: 5
Great sights for 43(25/01/2018)
This was my first U-notch rear sight, so a bit of a leap of faith. I am now sold. This rear sight is great, its steel (not alum), I like the set screws for just-in-case. The notch is great, they fit great and look great on my new 43.
The pictures were shot with a flash, so they are not exactly accurate on the color; the sight is flat black.
For a front sight, I used a Trijicon HD XR glock front for a 45. (892-000-359WB ). On glocks, the height of front sight for 45/10mm is less than 9mm models. The Wilson matching front is listed at .200 high, which is same as the HD XR, (per Trijicon website). I did some math and guessed that the front would match up with this rear sight.
It matches quite well. How wide a rear for a given front is a personal thing, I like my rears pretty wide with some light on each side. The short radius of a 43 and the not super narrow front, gives a little light on each side when shooting. On a competition pistol, I would want more light per side, but on a 43, it just works.
Its a great combo, and I now want Wilson U-notch sights on the rest of my glocks!
N. prodotto: 965000221 WILSON COMBAT VICKERS ELITE BATTLESIGHT FOR GLOCK 42/43 Parti Fabbricante: 759B811826021168 Il mirino posteriore di alto profilo Vickers Elite Battlesight ha un'ampia tacca a U profonda .145”, ottimale per la mira in condizioni di scarsa luminosità e dinamiche di tiro, ed è il complemento perfetto per i nostri mirini anteriori larghi .125”. La lama posteriore concava non riflettente è zigrinata 40 linee per pollice, mentre l'area della tacca è incassata in una tasca semicircolare per un'immagine di mira nitida e protetta. Due viti di fissaggio indurite garantiscono che questo mirino non si allenti mai sotto le condizioni più esigenti. Questo mirino posteriore senza sporgenze ha anche una forma a mensola che consente il ciclismo della slitta con una mano o la risoluzione di malfunzionamenti e un robusto finito opaco nero parkerizzato non riflettente.
89.9EUR189,90 €
*
Tempi di consegna circa 12-16 giorni. 1 pz. nel magazzino USA
Caratteristiche:Adatto per: GlockColore delle mire: BlackModello: 42, 43Tipo: U-Notch
Adatto per:
Glock
Colore delle mire:
Black
Modello:
42,43
Tipo:
U-Notch
Peso della spedizione: 0,009kgLarghezza di spedizione: 76mmLunghezza di spedizione: 127mm
The high profile Vickers Elite Battlesight rear has a .145” wide, deep U-Notch for optimum sighting in low-light, dynamic range conditions and is a perfect match to our .125” wide front sights. The concave non-reflective rear blade is serrated 40 lines per inch, while the notch area is recessed into a semi-circular pocket for a crisp, protected sight picture. Two hardened set-screws ensure this sight will never shoot loose under the most demanding conditions. This snag-free rear sight also has a shelf shape that enables one-hand slide cycling or malfunction clearance and a rugged, non-reflective matte black parkerized finish.
Altro...
Il mirino posteriore di alto profilo Vickers Elite Battlesight ha un'ampia tacca a U profonda .145”, ottimale per la mira in condizioni di scarsa luminosità e dinamiche di tiro, ed è il complemento perfetto per i nostri mirini anteriori larghi .125”. La lama posteriore concava non riflettente è zigrinata 40 linee per pollice, mentre l'area della tacca è incassata in una tasca semicircolare per un'immagine di mira nitida e protetta. Due viti di fissaggio indurite garantiscono che questo mirino non si allenti mai sotto le condizioni più esigenti. Questo mirino posteriore senza sporgenze ha anche una forma a mensola che consente il ciclismo della slitta con una mano o la risoluzione di malfunzionamenti e un robusto finito opaco nero parkerizzato non riflettente.
Altro...
Punteggi dei clienti per WILSON COMBAT VICKERS ELITE BATTLESIGHT FOR GLOCK 42/43
Numero di punteggi: 1
Da brownells.com: 1
Punteggio medio: 5
Great sights for 43(25/01/2018)
This was my first U-notch rear sight, so a bit of a leap of faith. I am now sold. This rear sight is great, its steel (not alum), I like the set screws for just-in-case. The notch is great, they fit great and look great on my new 43.
The pictures were shot with a flash, so they are not exactly accurate on the color; the sight is flat black.
For a front sight, I used a Trijicon HD XR glock front for a 45. (892-000-359WB ). On glocks, the height of front sight for 45/10mm is less than 9mm models. The Wilson matching front is listed at .200 high, which is same as the HD XR, (per Trijicon website). I did some math and guessed that the front would match up with this rear sight.
It matches quite well. How wide a rear for a given front is a personal thing, I like my rears pretty wide with some light on each side. The short radius of a 43 and the not super narrow front, gives a little light on each side when shooting. On a competition pistol, I would want more light per side, but on a 43, it just works.
Its a great combo, and I now want Wilson U-notch sights on the rest of my glocks!